Search results

The purpose of this chapter is to develop academic answers to the key rural areas and smart villages and digital agriculture. This chapter analyses the National level initiatives of Government of India Mission to convert rural areas into smart cities. The Union Ministry of urban development collaborates with State Government and nominate a particular city or cities in their state. Financial incentives or benefits will be provided to enhance the quality of the city. Coimbatore being a cosmopolitan city it is also a combination of rural villages and urban township. The main objective of this chapter is to identify and explore the initiatives of SMART CITIES MISSION a joint venture activity initiated by Government of India and State Government of Tamil Nadu. The results clearly indicate how digital technologies play a pivotal role to enhance the quality of eco-friendly initiatives and to improve the smart villages and agriculture. The key recommendations are the lessons learnt from other smart cities initiatives in other states and how Coimbatore can be an example and adopt key takeaways from other states and cities around the world.

This study aims to understand the current production scenario emphasizing the significance of green manufacturing in achieving economic and environmental sustainability goals to fulfil future needs; to determine the viability of particular strategies and actions performed to increase the process efficiency of electrical discharge machining; and to uphold the values of sustainability in the nonconventional manufacturing sector and to identify future works in this regard.

A thorough analysis of numerous experimental studies and findings is conducted. This prominent nontraditional machining process’s potential machinability and sustainability challenges are discussed, along with the current research to alleviate them. The focus is placed on modifications to the dielectric fluid, choosing affordable substitutes and treating consumable tool electrodes.

Trans-esterified vegetable oils, which are biodegradable and can be used as a substitute for conventional dielectric fluids, provide pollution-free machining with enhanced surface finish and material removal rates. Modifying the dielectric fluid with specific nanomaterials could increase the machining rate and demonstrate a decrease in machining flaws such as micropores, globules and microcracks. Tool electrodes subjected to cryogenic treatment have shown reduced tool metal consumption and downtime for the setup.

The findings suggested eco-friendly machining techniques and optimized control settings that reduce energy consumption, lowering operating expenses and carbon footprints. Using eco-friendly dielectrics, including vegetable oils or biodegradable dielectric fluids, might lessen the adverse effects of the electrical discharge machine operations on the environment. Adopting sustainable practices might enhance a business’s reputation with the public, shareholders and clients because sustainability is becoming increasingly significant across various industries.

A detailed general review of green nontraditional electrical discharge machining process is provided, from high-quality indexed journals. The findings and results contemplated in this review paper can lead the research community to collectively apply it in sustainable techniques to enhance machinability and reduce environmental effects.

The purpose of this paper is to explore a multi-criteria decision-making (MCDM) methodology to determine an optimal combination of process parameters that is capable of generating favorable dimensional accuracy and product quality during turning of commercially pure titanium (CP-Ti) grade 2.

The present paper recommends an optimal combination of cutting parameters with an aim to minimize the cutting force (F_c), surface roughness (R_a), machining temperature (T_m) and to maximize the material removal rate (MRR) after turning of CP-Ti grade 2. This was achieved by the simultaneous optimization of the aforesaid output characteristics (i.e. F_c, R_a, T_m, and MRR) using the MCDM-based TOPSIS method. Taguchi’s L₉ orthogonal array was used for conducting the experiments. The output responses (cutting force: F_c, surface roughness: R_a, machining temperature: T_m and MRR) were integrated together and presented in terms of a single signal-to-noise ratio using the Taguchi method.

The results of the proposed methodology depict that the higher MRR with desirable surface quality and the lower cutting force and machining temperature were observed at a combination of cutting variables as follows: cutting speed of 105 m/min, feed rate of 0.12 mm/rev and depth of cut of 0.5 mm. The analysis of variance test was conducted to evaluate the significance level of process parameters. It is evident from the aforesaid test that the depth of cut was the most significant process parameter followed by cutting speed.

The selection of an optimal parametric combination during the machining operation is becoming more challenging as the decision maker has to consider a set of distinct quality characteristics simultaneously. This situation necessitates an efficient decision-making technique to be used during the machining operation. From the past literature, it is noticed that only a few works were reported on the multi-objective optimization of turning parameters using the TOPSIS method so far. Thus, the proposed methodology can help the decision maker and researchers to optimize the multi-objective turning problems effectively in combination with a desirable accuracy.

Machine scheduling plays an important role in most manufacturing industries and has received a great amount of attention from operation researchers. Production scheduling is concerned with the allocation of resources and the sequencing of tasks to produce goods and services. Dispatching rules help in the identification of efficient or optimized scheduling sequences. The purpose of this paper is to consider a data mining‐based approach to discover previously unknown priority dispatching rules for the single machine scheduling problem.

In this work, the supervised statistical data mining algorithm, namely Bayesian, is implemented for the single machine scheduling problem. Data mining techniques are used to find hidden patterns and rules through large amounts of structured or unstructured data. The constructed training set is analyzed using Bayesian method and an efficient production schedule is proposed for machine scheduling.

After integration of naive Bayesian classification, the proposed methodology suggests an optimized scheduling sequence.

This paper analyzes the progressive results of a supervised learning algorithm tested with the production data along with a few of the system attributes. The data are collected from the literature and converted into the training data set suitable for implementation. The supervised data mining algorithm has not previously been explored in production scheduling.

This paper aims to propose an innovative parametric design for artificial neural network (ANN) modeling for the multi-quality function problem to determine the optimal process scenarios.

The innovative hybrid algorithm gray relational analysis (GRA)-ANN and the GRA-Entropy are proposed to effectively solve the multi-response optimization problem.

Both the GRA-ANN and the GRA-Entropy analytical approaches find that the optimal process scenario is a stencil aperture of 57 per cent and immediate processing of the printed circuit board after exposure to a room environment.

A six-week confirmation test indicates that the optimal process has improved quad flat non-lead assembly yield from 99.12 to 99.78 per cent.

This paper aims to deal with the optimization of engine operational parameters such as load, compression ratio and blend percentage of fuel using a combined approach of particle swarm optimization (PSO) with Derringer’s desirability.

The performance parameters such as brake thermal efficiency (BTHE), brake specific fuel consumption (BSFC), CO, HC, NO_x and smoke are considered as objectives with compression ratio, blend percentage and load as input factors. Optimization is carried out by using PSO coupled with the desirability approach.

From results, the optimum operating conditions are found to be at compression ratio of 18.5 per cent of fuel blend and 11 kg of load. At this input’s parameters of the engine, outputs performance parameters are found to be 34.84 per cent of BTHE, 0.29 kg/kWh of BSFC, 2.86 per cent of CO, 13 ppm of HC, 490 ppm of NO_x and 26.25 per cent of smoke.

The present study explores the abilities of both particle swarm algorithm and desirability approach when used together. The combined approach resulted in faster convergence and better prediction capability. The present approach predicted performance characteristics of the variable compression ratio engine with less than 10 per cent error.

The problem of design changes in the construction industry is common worldwide, and the Jordanian market is no exception. The purpose of this paper is to identify the factors causing design changes in construction projects in Jordan in both the public and private sectors. Furthermore, this research will examine the effect of these factors on project's performance during the construction phase.

This research commences by identifying the factors causing design changes in construction projects worldwide through an intensive literature review. The identified factors were then filtered to those applicable to the Jordanian construction market based on the results obtained from a questionnaire survey and real case construction projects. In total, 252 professionals from the Jordanian construction industry and 10 completed and/or ongoing construction projects in different parts of Jordan were compared.

The results find that the top major factors affecting design changes are owner's requirements; design errors and omissions and value engineering. The research also studies and documents the impacts of design changes on project cost, schedule and quality.

The results obtained from this research will assist the construction professionals representing owners, consultants and contractors in applying control measures to minimize the occurrence of the identified factors causing design changes and to mitigate their sever impacts on projects in terms of cost, schedule and quality.

This paper aims to present sample-based estimation methodologies to compute the confidence interval for the mean size of the content of material communicated on the digital social media platform in presence of volume, velocity and variety. Confidence interval acts as a tool of machine learning and managerial decision-making for coping up big data.

Random sample-based sampling design methodology is adapted and mean square error is computed on the data set. Confidence intervals are calculated using the simulation over multiple data sets. The smallest length confidence interval is the selection approach for the most efficient in the scenario of big data.

Resultants of computations herein help to forecast the future need of web-space at data-centers for anticipation, efficient management, developing a machine learning algorithm for predicting better quality of service to users. Finding supports to develop control limits as an alert system for better use of resources (memory space) at data centers. Suggested methodologies are efficient enough for future prediction in big data setup.

In IT sector, the startup with the establishment of data centers is the current trend of business. Findings herein may help to develop a forecasting system and alert system for optimal decision-making in the enhancement and share of the business.

The contribution is an original piece of thought, idea and analysis, deriving motivation from references appended.

The purpose of study is to overcome the error estimation of standard deviation derived from Expected improvement (EI) criterion. Compared with other popular methods, a quantitative model assessment and analysis tool, termed high-dimensional model representation (HDMR), is suggested to be integrated with an EI-assisted sampling strategy.

To predict standard deviation directly, Kriging is imported. Furthermore, to compensate for the underestimation of error in the Kriging predictor, a Pareto frontier (PF)-EI (PFEI) criterion is also suggested. Compared with other surrogate-assisted optimization methods, the distinctive characteristic of HDMR is to disclose the correlations among component functions. If only low correlation terms are considered, the number of function evaluations for HDMR grows only polynomially with the number of input variables and correlative terms.

To validate the suggested method, various nonlinear and high-dimensional mathematical functions are tested. The results show the suggested method is potential for solving complicated real engineering problems.

In this study, the authors hope to integrate superiorities of PFEI and HDMR to improve optimization performance.

The purpose of this paper is to improve the efficiency of particle optimization method by using direct and indirect surrogate modeling in inverse design problems.

The new algorithm emphasizes the use of a direct and an indirect design prediction based on local surrogate models in particle swarm optimization (PSO) algorithm. Local response surface approximations are constructed by using radial basis neural networks. The principal role of surrogate models is to answer the question of which individuals should be placed into the next swarm. Therefore, the main purpose of surrogate models is to predict new design points instead of estimating the objective function values. To demonstrate its merits, the new approach and six comparative algorithms were applied to two different test cases including surface fitting of a geographical terrain and an inverse design of a wing, the averaged best-individual fitness values of the algorithms were recorded for a fair comparison.

The new algorithm provides more than 60 per cent reduction in the required generations as compared with comparative algorithms.

The comparative study was carried out only for two different test cases. It is possible to extend test cases for different problems.

The proposed algorithm can be applied to different inverse design problems.

The study presents extra ordinary application of double surrogate modeling usage in PSO for inverse design problems.